Outbreaks of waterborne illnesses are one of the biggest risks after a calamity. It's vital that survivors have access to clean water for drinking and washing. As a general guideline, America's ready.gov website recommends households store at least 4 liters (1 gallon) of water per person, per day and and have a minimum of three days supply per person. These figures are likely to be too low for a country like the Philippines with its tropical climate and scattered islands. No matter how much you store, supplies may eventually run low before infrastructure is restored or relief arrives so it's important to know how to treat water before drinking. Here's a summary of a few simple methods that use equipment or ingredients accessible to most Philippine households.

Boiling

Many of us, especially those who have spent time the provinces, may remember our parents and grandparents boiling water for drinking. It's still the safest method of treating water but it does consume fuel. To boil water for drinking:

1. Put some water in a pot or kettle. Make sure the water has been filtered of debris, sediment and has not been contaminated by chemicals.
2. Boil the water until it's bubbling vigorously for one full minute.
3. After boiling, let it cool before drinking.

Chlorination with household bleach

1. Add approx. 2-4 drops of bleach per liter of water (approx. 16 drops per gallon).
2. Stir and leave it for 30 minutes.
3. The water should have a slight bleach smell after 30 minutes.
4. If you don't smell any bleach, treat the water again and wait an additional 15 minutes.
5. Do not use the water if it still doesn't smell of bleach after the second treatment.

Make sure you use a new bottle of plain household chlorine bleach (5.25 to 6.0 percent sodium hypochlorite) with no additives. Opened and older bleach bottles may have lost its potency over time. More information: FEMA and American Red Cross guide: Food and Water in an Emergency (PDF download).

Solar water disinfection (SODIS)

Solar water disinfection, or SODIS is a new method that's starting to gain acceptance in tropical countries. It's simple, free and uses low-tech, easy-to-find materials. The World Health Organisation, UNICEF, and the Red Cross recommend the SODIS method for treating drinking water in developing countries. See related article: A cheap and effective way to disinfect water in tropical countries.

Other water treatment methods

There are many other methods you can use to create potable water for your family. However, they need more research, practice or require equipment or supplies that aren't so readily available.

• Iodine: See instructions on instructables.com. I haven't included this in the main section as there are some concerns about safe doses.
• Calcium Hypochlorite (used for treating swimming pool water).
• Distillation: How to distill clean drinking water in emergency.
• UV light sterilizer, like a SteriPEN.
• Water filter. There are many different brands and models with different capabilities so you'll need to look around for one that suits your needs.

Chemical contamination

Most of these methods work by killing disease-causing micro-organisms in the water. Unless you distill the water or use an appropriate filter, any chemical contaminants will remain in the water. It's therefore important to stay way from water that may have been fouled by dangerous chemicals. Continue Reading